Search results
Results From The WOW.Com Content Network
The 992 uses rack and pinion steering, along with MacPherson strut front suspension and rear multi-link suspension.The 992 has wide rear-wheel arches which will be a part of every model in the 992 generation (a design feature limited chiefly to high performance variants of previous 911 iterations) along with 20-inch wheels at the front and 21-inch wheels at the rear.
Constant-velocity joint. A constant-velocity joint (also called a CV joint and homokinetic joint) is a mechanical coupling which allows the shafts to rotate freely (without an appreciable increase in friction or backlash) and compensates for the angle between the two shafts, within a certain range, to maintain the same velocity.
Ball joint. A typical ball joint with cutaway view (right) An inner tie rod end cut open to expose the ball joint. In an automobile, ball joints are spherical bearings that connect the control arms to the steering knuckles, and are used on virtually every automobile made. [ 1] They bionically resemble the ball-and-socket joints found in most ...
You can find instant answers on our AOL Mail help page. Should you need additional assistance we have experts available around the clock at 800-730-2563.
Porsche claimed that the new 911 turbo will accelerate from 0 to 100 km/h (0 to 62 mph) in 3.4 seconds, or 0–60 mph in 3.2 seconds and could reach a top-speed of 312 km/h (194 mph). As with the 996 Turbo, the car featured distinctive styling cues over the Carrera models including front LED driving/parking/indicator lights mounted on a ...
Under the new plan, US forces in Japan would be “reconstituted” as a joint force headquarters reporting to the Commander of US Indo-Pacific Command to “facilitate deeper interoperability and ...
ASTM A992 steel is a structural steel alloy often used in the US for steel wide-flange and I beams. Like other carbon steels, the density of ASTM A992 steel is approximately 7850 kg/m 3 (0.2836 lb/in 3 ). ASTM A992 steel has the following minimum mechanical properties, according to ASTM specification A992/A992M.
The 250 was a stroked 200, made by increasing the stroke from 3.126 to 3.91 in (79.4 to 99.3 mm). Output was 155 hp (116 kW) in the Mustang, and the 250 became the base engine in 1971. The Ford Granada and Mercury Monarch offered the 250 inline-six for the 1975–1980 model years, when it was replaced by the 200 inline-six.