Housing Watch Web Search

Search results

1. Results From The WOW.Com Content Network

2. Lumber - Wikipedia

   en.wikipedia.org/wiki/Lumber

   In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 inch.

3. Board foot - Wikipedia

   en.wikipedia.org/wiki/Board_foot

   An example of planed lumber is softwood "two by four" lumber sold by large lumber retailers, nominally 2 by 4 inches (50 mm × 100 mm). The 2 × 4 is actually only 1 + 1 ⁄ 2 in × 3 + 1 ⁄ 2 in (38 mm × 89 mm), but the dimensions for the lumber when purchased wholesale could still be represented as full 2 × 4 lumber, although the "standard ...

4. Wall stud - Wikipedia

   en.wikipedia.org/wiki/Wall_stud

   Typical dimensions of today's "two by four" is 1.5 by 3.5 inches (38 mm × 89 mm) dimensional lumber prior to sanding and are typically placed 16 inches (406 mm) from each other's center, but sometimes also at 12 inches (305 mm) or 24 inches (610 mm).

5. Framing (construction) - Wikipedia

   en.wikipedia.org/wiki/Framing_(construction)

   Framing side by side units. The erection of a wooden frame in Sabah, Malaysia. Framing, in construction, is the fitting together of pieces to give a structure support and shape. [ 1] Framing materials are usually wood, engineered wood, or structural steel. The alternative to framed construction is generally called mass wall construction, where ...

6. Timber framing - Wikipedia

   en.wikipedia.org/wiki/Timber_framing

   Timber-framed structures differ from conventional wood-framed buildings in several ways. Timber framing uses fewer, larger wooden members, commonly timbers in the range of 15 to 30 cm (6 to 12 in), while common wood framing uses many more timbers with dimensions usually in the 5- to 25-cm (2- to 10-in) range.

7. Toe board - Wikipedia

   en.wikipedia.org/wiki/Toe_board

   Toe board. A roofing toe board is one of the most basic pieces of safety equipment a roofer can use. A toe board is a long piece of 2 inch x 4 inch (a 2x4) wood nailed horizontally along a roof in various places. Most roofers work in a variety of weather conditions, sometimes severe heat, and resist wearing an apparatus such as a safety harness.