Search results
Results From The WOW.Com Content Network
The most commonly encountered are the "XT" ("set 1") scancodes, based on the 83-key keyboard used by the IBM PC XT and earlier. These mostly consist of a single byte; the low 7 bits identify the key, and the most significant bit is clear for a key press or set for a key release. Some additional keys have an E0 (or rarely, E1 or E2) prefix.
This page lists codes for keyboard characters, the computer code values for common characters, such as the Unicode or HTML entity codes (see below: Table of HTML values"). There are also key chord combinations, such as keying an en dash ('–') by holding ALT+0150 on the numeric keypad of MS Windows computers. The HTML codes can be used where a ...
The standard encoding of the keyboard that offers the INT 16 h is a US keyboard. To adapt the coding of the INT 16h to another type of keyboard (for example, an international keyboard), the code must analyze the scan-code of the key pressed, and then perform suitable interpreting.
A typical 105-key computer keyboard, consisting of sections with different types of keys. A computer keyboard consists of alphanumeric or character keys for typing, modifier keys for altering the functions of other keys, [1] navigation keys for moving the text cursor on the screen, function keys and system command keys—such as Esc and Break—for special actions, and often a numeric keypad ...
The keyboard sends the key code to the keyboard driver running in the main computer; if the main computer is operating, it commands the light to turn on. All the other indicator lights work in a similar way. The keyboard driver also tracks the Shift, alt and control state of the keyboard.
1 Control-C has typically been used as a "break" or "interrupt" key. 2 Control-D has been used to signal "end of file" for text typed in at the terminal on Unix / Linux systems. Windows, DOS, and older minicomputers used Control-Z for this purpose. 3 Control-G is an artifact of the days when teletypes were in use.
For values in the RAM memory registers assigned for screen I/O, the value will be interpreted as a 16 pixel map of the 256 row x 512 column virtual screen by the computer's independent I/O subsystem if the screen is "turned on". The code value in keyboard memory may be read programmatically and interpreted for use by a program.
Step 1 {of topmost APL code entered at left}) 4-5 = -1. Step 2) 3 times -1 = -3. Step 3) Take the floor or lower of 2 and -3 = -3. Step 4) Divide 1 by -3 = -0.3333333333 = final result. An operator may have function or data operands and evaluate to a dyadic or monadic function. Operators have long left scope.