Ad
related to: 8.5 x 11 paper size in microsoft word cm
Search results
Results From The WOW.Com Content Network
The Reagan administration made Letter-size paper the norm for US federal forms in the early 1980s; previously, the smaller "official" Government Letter size, 8 by 10.5 inches (203.2 by 266.7 mm) (aspect ratio: 1.3125), was used in government, while 8.5-by-11-inch (215.9 by 279.4 mm) paper was standard in most other offices.
It has the height of Canadian P4 paper (215 mm × 280 mm, about 81⁄2 in × 11 in) and the width of international A4 paper (210 mm × 297 mm or 8.27 in × 11.69 in), i.e. it uses the smaller value among the two for each side. The table shows how this format can be generalized into an entire format series.
Printing and writing papers are paper grades used for newspapers, magazines, catalogs, books, notebooks, commercial printing, business forms, stationeries, copying and digital printing. About 1/3 of the total pulp and paper marked (in 2000) is printing and writing papers. [1] The pulp or fibers used in printing and writing papers are extracted ...
Standard paper sizes, such as the international standard A4, also impose limitations on line length: using the US standard Letter paper size (8.5×11"), it is only possible to print a maximum of 85 or 102 characters (with the font size either 10 or 12 characters per inch) without margins on the typewriter. With various margins – usually from ...
ISO 216. ISO 216 is an international standard for paper sizes, used around the world except in North America and parts of Latin America. The standard defines the " A ", " B " and " C " series of paper sizes, which includes the A4, the most commonly available paper size worldwide. Two supplementary standards, ISO 217 and ISO 269, define related ...
Foolscap folio, commonly contracted to foolscap or cap or folio and in short FC, is paper cut to the size of 8.5 × 13.5 in (216 × 343 mm) for printing or to 8 × 13 in (203 × 330 mm) for "normal" writing paper (foolscap). [1] This was a traditional paper size used in some parts of Europe, and the British Commonwealth, before the adoption of ...
metric ( SI) units. 4.2333 mm. The pica is a typographic unit of measure corresponding to approximately 6 of an inch, or from 68 to 73 of a foot. One pica is further divided into 12 points . In printing, three pica measures are used: The French pica of 12 Didot points (also called cicero) generally is: 12 × 0.376 = 4.512 mm (0.1776 in).
The sizes were gradually standardized as described above. Modern Chinese typography uses the following names in general preference to stating the number of points. In ambiguous contexts, the word hào (t 號, s 号, lit. "number") is added to the end of the size name to clarify the meaning.
Ad
related to: 8.5 x 11 paper size in microsoft word cm