Housing Watch Web Search

Search results

1. Results From The WOW.Com Content Network

2. Water–cement ratio - Wikipedia

   en.wikipedia.org/wiki/Water–cement_ratio

   Water–cement ratio. The water–cement ratio ( w/c ratio, or water-to-cement ratio, sometimes also called the Water-Cement Factor, f) is the ratio of the mass of water ( w) to the mass of cement ( c) used in a concrete mix: The typical values of this ratio f = w⁄c are generally comprised in the interval 0.40 and 0.60.

3. Concrete - Wikipedia

   en.wikipedia.org/wiki/Concrete

   Instead of using a 'nominal mix' of 1 part cement, 2 parts sand, and 4 parts aggregate (the second example from above), a civil engineer will custom-design a concrete mix to exactly meet the requirements of the site and conditions, setting material ratios and often designing an admixture package to fine-tune the properties or increase the ...

4. Properties of concrete - Wikipedia

   en.wikipedia.org/wiki/Properties_of_concrete

   The ultimate strength of concrete is influenced by the water-cementitious ratio (w/cm), the design constituents, and the mixing, placement and curing methods employed.All things being equal, concrete with a lower water-cement (cementitious) ratio makes a stronger concrete than that with a higher ratio. [2]

5. Abrams' law - Wikipedia

   en.wikipedia.org/wiki/Abrams'_law

   Abrams' law. Abrams' law (also called Abrams' water-cement ratio law) [1] is a concept in civil engineering. The law states the strength of a concrete mix is inversely related to the mass ratio of water to cement. [1] [2] As the water content increases, the strength of concrete decreases. Abrams’ law is a special case of a general rule ...

6. Ready-mix concrete - Wikipedia

   en.wikipedia.org/wiki/Ready-mix_concrete

   Batching and mixing is done under controlled conditions. In the UK, ready-mixed concrete is specified either informally, by constituent weight or volume (1-2-4 or 1-3-6 being common mixes) or using the formal specification standards of the European standard EN 206+ A1, which is supplemented in the UK by BS 8500. This allows the customer to ...

7. Types of concrete - Wikipedia

   en.wikipedia.org/wiki/Types_of_concrete

   The parts are in terms of weight – not volume. For example, 1-cubic-foot (0.028 m 3) of concrete would be made using 22 lb (10.0 kg) cement, 10 lb (4.5 kg) water, 41 lb (19 kg) dry sand, 70 lb (32 kg) dry stone (1/2" to 3/4" stone). This would make 1-cubic-foot (0.028 m 3) of concrete and would weigh about 143 lb (65 kg). The sand should be ...