Search results
Results From The WOW.Com Content Network
Parts of a driver's work day are defined in four terms: On-duty time, off-duty time, driving time, and sleeper berth time.. FMCSA regulation §395.2 states: [5]. On-duty time is all time from when a driver begins to work or is required to be in readiness to work until the driver is relieved from work and all responsibility for performing work.
The first HDD [11] had an average seek time of about 600 ms. [12] and by the middle 1970s, HDDs were available with seek times of about 25 ms. [13]Some early PC drives used a stepper motor to move the heads, and as a result had seek times as slow as 80–120 ms, but this was quickly improved by voice coil type actuation in the 1980s, reducing seek times to around 20 ms.
In the example provided by the US DoE in its final rule, an electric car with an energy consumption of 265 Watt hour per mile in urban driving, and 220 Watt hour per mile in highway driving, results in a petroleum-equivalent fuel economy of 335.24 miles per gallon, based on a driving schedule factor of 55 percent urban, and 45 percent highway ...
Braking distance. Braking distance refers to the distance a vehicle will travel from the point when its brakes are fully applied to when it comes to a complete stop. It is primarily affected by the original speed of the vehicle and the coefficient of friction between the tires and the road surface, [ Note 1] and negligibly by the tires' rolling ...
Mean time between failures ( MTBF) is the predicted elapsed time between inherent failures of a mechanical or electronic system during normal system operation. MTBF can be calculated as the arithmetic mean (average) time between failures of a system. The term is used for repairable systems while mean time to failure ( MTTF) denotes the expected ...
Drivers' working hours is the commonly used term for regulations that govern the activities of the drivers of commercial goods vehicles and passenger carrying vehicles. In the United States, they are known as hours of service . Within the European Union, Directive 2002/15/EC [1] is setting the rules regarding working time for drivers carrying ...
Delta time or delta timing is a concept used amongst programmers in relation to hardware and network responsiveness. [1] In graphics programming, the term is usually used for variably updating scenery based on the elapsed time since the game last updated, [2] (i.e. the previous "frame") which will vary depending on the speed of the computer, and how much work needs to be done in the program at ...
Driving Cycle Design. The "Drive-cycle" basically is the representative of the road. Drive cycles are used to reduce the expense of on road tests, time of test and fatigue of the test engineer. The whole idea is to bring the road to the test lab (a chassis dynamo-meter) or to the computer simulation. Two kinds of drive cycle can be made.