Search results
Results From The WOW.Com Content Network
[1] [2] as a ratio of one part rise to so many parts run. For example, a slope that has a rise of 5 feet for every 1000 feet of run would have a slope ratio of 1 in 200. (The word "in" is normally used rather than the mathematical ratio notation of "1:200".) This is generally the method used to describe railway grades in Australia and the UK.
A taper pin is a fastener used in mechanical engineering. They are steel rods with one end having a slightly larger diameter than the other. Metric taper pins have a taper of 1:50. [ 1] A 1:50 taper means that one end of a 50 mm long bar will be 1 mm smaller in diameter than the other end. Inch-sized taper pins have a slightly smaller taper ...
1:48 scale is a scale commonly used in diecast models, plastic models made from kits, and construction toys.It is especially popular with manufacturers of model aircraft and model trains, where it is known as "O scale". 1:48 is also a popular scale among Lego enthusiasts, since it is approximately the scale of the Lego minifigure relative to a six-foot tall human.
Definition. The Bode plot for a linear, time-invariant system with transfer function ( being the complex frequency in the Laplace domain) consists of a magnitude plot and a phase plot. The Bode magnitude plot is the graph of the function of frequency (with being the imaginary unit ). The -axis of the magnitude plot is logarithmic and the ...
1:48: 1 ⁄ 4 in: 6.350 mm: Aircraft models. Dollhouse. Military models. Wargaming. For dollhouse applications, 1:48 is commonly known as quarter scale (as it is one-quarter of the 1:12 "standard" dollhouse scale). Mainly military aircraft, but in 2005 Tamiya launched a new series of armored fighting vehicle (AFV) models in this scale. It is ...
Various scales may be used for different drawings in a set. For example, a floor plan may be drawn at 1:50 (1:48 or 1 ⁄ 4 ″ = 1′ 0″) whereas a detailed view may be drawn at 1:25 (1:24 or 1 ⁄ 2 ″ = 1′ 0″). Site plans are often drawn at 1:200 or 1:100. Scale is a nuanced subject in the use of engineering drawings.
The 37.5 mm length is not derived by a certain scale ratio. While HO scale is a 1:87 scale (3.5 mm to 1 foot), resulting in a 16.5 mm ( 0.65 in) gauge from real life prototype 1,435 mm ( 4 ft 81⁄2 in) standard gauge standard gauge. Conversely, modeling standard gauge in Lego trains would yield a scaling of (37.5:1435 =) 1:38.3.
Lift and drag are the two components of the total aerodynamic force acting on an aerofoil or aircraft. In aerodynamics, the lift-to-drag ratio (or L/D ratio) is the lift generated by an aerodynamic body such as an aerofoil or aircraft, divided by the aerodynamic drag caused by moving through air. It describes the aerodynamic efficiency under ...